Rite Aid Medi-Bell

Take the guesswork out of your medication schedule with the Rite Aid Medi-Bell, a compact safety dosage timer that attaches directly to your medication packaging. Using a simple set of elastic bands, the Medi-Bell clips onto blister packs, boxes or bottles and counts down to your next dosage interval, alerting you with a clear audible beep and a visible flashing LED light when it is time. Setting it up takes only moments: switch the device on, select your desired interval with the up and down buttons and press the green start button to begin the countdown on the LCD screen. When the alert sounds for one minute, press and hold the green start button for three seconds to stop the alarm and restart the countdown to the next dose. Lightweight and portable, the Medi-Bell is ideal for busy households, carers, travellers and anyone managing a regular dosage routine. Supplied with charging capability via a 5V 500mA or above adapter, it keeps your dosage reminders on time, every time.

Key Features

• Attaches to Medication Packaging: Secures to blister packs, boxes or bottles with elastic bands, bending at the hinges up to a maximum of 90 degrees.
• Customisable Dosage Intervals: Set any interval using the up and down adjustment buttons, with the timer counting down on the LCD screen.
• Audible and Visible Alerts: Beeps and flashes with LED lights for 1 minute at "00:00" to remind you it is time for the next dosage.
• Simple Restart: Press the green start button for 3 seconds after taking medication to stop the alert and restart the countdown.
• Rechargeable Design: Charges using a 5V 500mA or above power brick or adapter for reliable everyday use.

Directions

Attaching the Medi-Bell to Medication

1. Take the Medi-Bell and bend at the hinges and put it against the medication packaging. Do not bend the Medi-Bell further than 90°.
2. Stretch the band until one of the hook points reaches the hook on the bottom of the device.
3. Ensure that the band is not loose and is firmly attached to the packaging so that the device does not fall off easily.

Setting Up the Timer and Alarm

1. Switch on the Medi-Bell by pressing the power button. The LCD screen should turn on.
2. The LCD screen should start flashing and display "04:00" which means that the timer is ready to be set.
3. Press the up or down interval adjustment buttons until the desired dosage interval displays on the screen.
4. Press the green start button to start the countdown. The flashing should stop and the timer should begin counting down to "00:00".
5. When the timer reaches "00:00", the device will initially beep and flash for 1 minute to alert the user that it is time to take the next medication dosage.
6. When the medication has been taken, press the green start button again for 3 seconds to stop the alert and restart the countdown to the next dosage.

Before placing the Medi-Bell in storage, ensure that it is switched off and that the timer is not set. Leaving the timer on will drain the battery quickly.

Warnings

DO NOT attach together medication that are not meant to be taken in the same frequency. Each Medi-Bell can only provide alerts for one (1) time interval at a time.

DO NOT stretch the elastic band more than twice its original length. Ideally, the band should be kept up to 1.5 times its original length.

Ensure that a 5V 500mA or above power brick or adapter is used to ensure proper charging of the device.

ALWAYS READ THE LABEL AND FOLLOW THE DIRECTIONS FOR USE.